Asterisk and Analog Interface Cards

4.1. Asterisk and Analog Interface Cards

These are some of the analog interface cards known to work with Asterisk

01. Diva Server Analog-4P - active 4 port FXO analogue card, requires kernel module: divadidd, known to work with chan_capi, voice and fax

02. Diva Server V-Analog-4P - active 4 port FXO analogue card, requires kernel module: divadidd, known to work with chan_capi, voice only

03. Diva Server Analog-8P - active 8 portFXO analogue card, requires kernel module: divadidd, known to work with chan_capi, voice and fax

04. Diva Server V-Analog-8P - active 8 portFXO analogue card, requires kernel module: divadidd, known to work with chan_capi, voice only

05. TDM400P - a half-length PCI 2.2-compliant card that supports FXS and FXO station interfaces for connecting analog telephones and analog POTS lines through a PC.

User Comments

luis enrique (riqueeltremendo at hotamil dot com)
16 October 2007 15:36:54
descargar

satish (satishk at procsys dot com)
03 July 2007 11:50:06
Anybody tried RJ11 to USB adapter with zaptel..?
I am trying but not able to succeed. I am getting error saying ZT_CHANCONFIG failed on channel 1: No such device or address (6).

I will thankful if anybody comment on this

souvik (souvik_sadhu at yahoo dot com)
13 April 2007 10:01:38
hi...

I have solved my problem.
Now everything is running properly

souvik

Vinicius (vini_tirado at hotmail dot com)
10 April 2007 22:05:58
ENF656-GSW-INPR H5003 MODEL IT-MI220 como eu faço pra esse driver ja bati um monte e nem um estalo o chip de dele e intel FA82537EP Por favor alguem me AJUDE^.......

ebony (firre at tom dot com)
10 January 2007 03:18:53
We have the cards support asterisk via zaptel driver, easy to use. please contact me: firre@tom.com

king (kingfloresinfo at hotmail dot com)
05 October 2006 17:31:39
i need the driver

king (kingfloresinfo at hotmail dot com)
05 October 2006 17:31:12
i need the driver

LUCIANO (lucianostgo at yahoo dot com)
03 October 2006 01:17:51
necesito los driver para un moden modelo ENF656-ISW-INPR

Erick Karugendo (ekarugendo at tcaa dot go dot tz)
14 August 2006 14:36:58
I would like to know the place i can get the these card in Tanzania East Africa.

Also the Hard Phone

BroadTel (info at broad-tel dot com)
22 June 2006 16:53:27
BroadTel TDM-001 FXO card works as X100P and use native Zaptel code. Check it out from www.broad-tel.com

MiaoLin (miaolin at openvox dot com dot cn)
26 April 2006 05:11:17
OpenVox A400P 1 to 4 port moduler card use wctdm driver,
OpenVox A1200P 1 to 12 port moduler card
OpenVox A100P 1 port FXO

Both these cards support asterisk via zaptel driver, easy to use.

Jouke Postma (asterisk at pwsthailand dot com)
17 April 2006 11:45:29
{ 0xe159, 0x0001, 0x8086, PCI_ANY_ID, 0, 0, (unsigned long) &wcx101p }, is added in your config.
Looking at the latest zaptel/wcfxo.c (V 1.2.5) the following lines are available as a generic modem:
{ 0xe159, 0x0001, 0x8086, PCI_ANY_ID, 0, 0, (unsigned long) &generic },
{ 0xe159, 0x0001, 0x8087, PCI_ANY_ID, 0, 0, (unsigned long) &generic },

regards,
www.pwsthailand.com (working on the ehors - asterisk integration)

herbert (herbert at pcsnetworksolutions dot com)
12 February 2006 05:09:20
i tried these modifications bot the code and the two resisters for these modems listed below and they still do not work

ENF656-ISW-INPR
ENF656-GSW-INPR
H5003
MODEL IT-MI220
H5005
ALL THESE HAVE INTEL CHIPSET INTEL CORPORATION FA82537EP
AND 536 AND 537EP

YET I HAVE A TIGER JET MODEM WITH MD3200 CHIPSET AND IT PICKS IT UP
IMEDIATELY WITH NO MOD REQUIRED

phpote (phpote at yahoo dot fr)
10 January 2006 00:37:22
The intel V92 modem is exactly the same card as the XP100 from Digitum.

One important point when you use an Intel V92 modem card that has not been purchased as the X100P card from Digium, but otherwise look identical to it, is that the electronic vendorID read from the card will be different. There are two ways to get around this:

1. If you are compiling Asterisk from source, edit the zaptel/wcfxo.c file as follows:

Existing code:
static struct pci_device_id wcfxo_pci_tbl[] __devinitdata = {
{ 0xe159, 0x0001, 0x8085, PCI_ANY_ID, 0, 0, (unsigned long) &wcx101p },
{ 0x1057, 0x5608, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &wcx100$ };

Now change the wcfxo_pci_tbl[] in zaptel/wsfxo.c to:
static struct pci_device_id wcfxo_pci_tbl[] __devinitdata = {
{ 0xe159, 0x0001, 0x8085, PCI_ANY_ID, 0, 0, (unsigned long) &wcx101p },
{ 0xe159, 0x0001, 0x8086, PCI_ANY_ID, 0, 0, (unsigned long) &wcx101p },
{ 0x1057, 0x5608, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &wcx100$ };

The added line in the middle will allow the wcfxo driver to work with off the shelf Intel v92 Winmodem cards as well as with the Digium X100P cards.

2. The other alternative is to make the same modification to the card that Digium did when they turned them into "genuine" X100P cards. Simply carefully remove R13 and R19 with a soldering iron. R13 & R19 are pull down resistors that affects the vendorID number that is read from the card. With these two resistors gone, you now have a card that will appear as a genuine Digium X100P card to the Asterisk software.

Cards purchased from vendors such as DigitNetworks will already have been modified this way, but then they charge quite a bit more than the US $5 - $15 that one can pick up these Intel Winmodem PCI cards for elsewhere. It is considerably cheaper when you modify the wcfxo driver source code, and/or remove the 2 resistors yourself.

I got this from a forum and I can't remember where but I bought a used intel V92, removed the two resistors as I had installed Zaptel as package (Debian) and it works quite well.

Hope this helps. Can't take the credit for it though.

marc (marc dot baudot at gmail dot com)
06 January 2006 16:35:29
can We use our old PSTN MODEM (v.92) as a fxs card?

mikson (miksonx at gmail dot com)
20 October 2005 18:59:15
Can some one tell me what Analog modems are supported with asterix PBX

balvinder singh jassar (balvinderjassar at gmail dot com)
01 August 2005 15:46:05
please provied some information

Add Comment

Latest Headlines:

T.38 faxing with Zoiper 2.15 is now easier than ever
section: voip software
Asterisk 1.4.21 Released
section: Asterisk
Asterisk 1.4.20 Released
section: Asterisk
Asterisk 1.4.20-rc2 Released
section: Asterisk
Asterisk 1.4.20-rc1 Now Available
section: Asterisk
News Archives (older news)

Latest Tutorials:

VMAuthenticate (dialplan application)
added 01/Mar/2008 15:57
Siptronic ST-530
added 06/Nov/2007 17:57
Siemens C455 IP hardphone
added 05/Nov/2007 10:24
Zoiper
added 22/Oct/2007 17:53
Grandstream GXP-2020
added 15/Oct/2007 18:17

Latest Comments:

<p><a href="http://forum.upkelk.com/f62....
section: Asterisk
i agry ur sip dialar ...
tutorial: Idefisk - IAX2 softphone
It happened that a Dog <a href="http://w...
section: voip hardware
It happened that a Dog <a href="http://w...
section: voip hardware
thinks i installation <A href=\"http:...
tutorial: Installation on CentOS

Name:
Email:
Comment:
In order to prevent automatic posting on our website, we kindly request you to type in the number you see in the picture below.
Image Verification: